The Brothers That Just Do Gutters · Charleston
Gutter Styles in Charleston & the Lowcountry
K-style and half-round profiles chosen for the house, from historic Charleston homes and raised island houses to newer builds in Summerville.
- Free Written Estimates
- K-Style & Half-Round
- Veteran Owned
The Brothers That Just Do Gutters
Charleston
- Gutter profiles that suit your home’s architecture
- Hidden hangers, sealed corners
- Radius gutters that follow curved Lowcountry walls
- A free estimate comparing options together
Quick answer
Gutter Styles in Charleston, SC and the Lowcountry: The Brothers That Just Do Gutters Charleston installs K-style and half-round seamless gutters matched to the house: K-style for the clean lines of brick ranches and newer two-story homes, half-round where the gutter is part of the look, like a historic home downtown or a Lowcountry house under a metal roof. Call (843) 867-2267 or book online.
A gutter runs the full length of the house, so its shape shows. K-style, with its flat back and decorative front, is the profile on most Lowcountry homes because it is strong and carries a lot of water. Half-round is the rounded trough you see on older and more traditional homes, chosen mainly for appearance.
Historic Charleston homes and Lowcountry houses under standing seam metal roofs are where half-round, often in copper, earns its place. On a brick ranch in West Ashley or a newer two-story home in Summerville, a K-style run in a color matched to the trim usually looks best. Ask your Solutionist which half-round options are available for your home.
Gutter styles in the Lowcountry
K-style or half-round, plus the fittings that complete the system
The profile sets the look. The hangers, downspouts and fittings decide how it holds up. Here is how each piece fits the homes we work on across the Charleston area.
Most of the K-style we hang goes on brick ranches in West Ashley and North Charleston and on the newer two-story homes of Summerville, Goose Creek and Daniel Island. Its flat back sits tight against the fascia, and the shaped front adds stiffness along a long eave while holding plenty of water. On a house with simple trim, it simply looks right.
Half-round is about character. On a historic Charleston home or a Lowcountry house under a standing seam metal roof, the rounded trough echoes the house’s era, and paired with round downspouts it becomes part of the architecture. It hangs differently, too, which affects how it is installed and serviced.
Each profile is available in 5 and 6 inch, and either one can be bent into a radius gutter that wraps a curved wall, so picking a style never costs you capacity or fit.
Comparing K-style and half-round
| Question | K-style | Half-round |
|---|---|---|
| Shape | Flat back, K-shaped front | A rounded trough |
| How it hangs | Quick Screw hidden hanger, angled through the back of the gutter into the fascia | A combo hanger fastened to the fascia, plus a spring clip over the front lip |
| Usual downspouts | Rectangular, 3×4 inch on 6 inch and oversized on 7 inch | Round, 3 or 4 inch, smooth or corrugated (smooth comes only in copper) |
| Why people choose it | Strength and high capacity | Looks alone, making it a Lowcountry specialty style |
| Best fit here | Ranch, two-story and raised homes, plus commercial buildings | Historic homes and houses under metal roofs, often in copper |
Small fittings that most homeowners never see
- Gutter wedges fill in where the fascia leans or trim sits behind the gutter, so the gutter hangs straight.
- On eaves without any fascia board, roof straps clip to the hanger and attach up on the roof.
- End caps get crimped in place and sealed so no water escapes from the end of a gutter.
- Elbows bring each downspout from the gutter in to the wall, then kick the water out at the base so it does not land on the foundation.
- Conductor heads in copper or aluminum dress up the top of a downspout and catch the rush where a big roof area drains to one spot.
Older Charleston homes: what turns up behind the old gutters
If your gutters are more than about 10 years old, look at the front lip. A row of nail heads means a nail and ferrule system: a long nail driven through the front of the gutter, through a ferrule sleeve and the back, and into the fascia. It was the standard method 20 years ago, and it is the reason so many older Lowcountry gutters sag. As the wood swells in the summer humidity and dries out again, the nails work loose until the run lets go. We replace them with hidden hangers and check the board behind them, replacing soft wood through our fascia board service. That replacement is also the right time to change profile, whether that means half-round copper gutters on a Craftsman or K-style seamless gutters in a trim-matched colored aluminum. Our gutter sizes guide covers how big each run should be.
See K-style and half-round against your own roofline at a free estimate. Call (843) 867-2267
Get a Free EstimateServices
More Ways We Help Charleston Homeowners
Make the style you like into a complete gutter system.
Half-round copper with matching downspouts and hangers, a natural fit for historic Charleston homes.
Learn more Specialty MaterialsWeigh copper against Galvalume, galvanized steel and colored aluminum before choosing a profile.
Learn more Seamless GuttersK-style gutters formed as one piece on site, leaving joints only at the corners.
Learn more Gutter InstallationOld gutters removed, your new profile installed and downspouts set where the water needs to go.
Learn more Fascia Board RepairA new gutter profile needs sound wood behind it, so rotted fascia gets replaced before we hang anything.
Learn more Free estimateRequest a Free EstimateTell us what is going on with your Lowcountry gutters. A local Solutionist walks the roofline, explains what you actually need and leaves a written price. No pressure, no obligation.
Book my free estimate or call (843) 867-2267How it works
Picking a Gutter Style That Suits Your Home
- 1Book a free estimate
Call (843) 867-2267 or book online and mention the look you have in mind.
- 2Compare profiles on site
Your Solutionist compares K-style and half-round against your roofline, trim and siding with you.
- 3Hang it right
Hidden hangers are spaced correctly and each corner is sealed at three points.
- 4Final look and flush
We check the drainage and walk the finished gutters with you.
Why the Brothers
Why Charleston Homeowners Call the Brothers
We look at the architecture before we talk profiles. A historic Charleston home and a new Summerville build should not wear the same gutter.
Hidden hangers and corners sealed three ways are what keep a handsome gutter doing its job for years.
We will tell you when plain K-style aluminum is the smart pick, even when half-round copper looks beautiful in pictures.
Founded in 1999 by brothers Ken and Ryan Parsons, veteran owned here in Mount Pleasant, and focused only on gutters.
Year-round
Your Charleston gutter calendar
How the year plays out on Lowcountry rooflines, and what our crews are doing in each stretch.
- Fall · Sep to NovPine drop clean-outs
Pine straw, oak leaves and sweetgum balls cleared from troughs and outlets while late-season storms are still rolling through.
- Winter · Dec to FebRepair and replacement
The calmer months for rehanging sagging runs, swapping out leaky sectional gutters and fixing fascia before spring.
- Spring · Mar to MayPollen and catkin season
Pine pollen and oak catkins flushed out of the outlets, and BroGuard installed before the summer storms arrive.
- Summer · Jun to AugThunderstorm season
The wettest stretch of the year. Overflow calls, downspout upgrades and new seamless gutters sized for the downpour.
The Work
Real Crews. Real Charleston and Lowcountry Homes.
Reviews
What Charleston Homeowners Say
“Big thanks to Justin Jenkins from Brothers Gutters for the fast repair on my hanging gutter. Great price and even better customer service. I’ll definitely be using them again and will recommend them to all of my clients and neighbors!!”
Posted on Google“The Brothers that do Gutters are amazing! It’s been an outstanding experience from the very beginning! The price is great, customer service fantastic and installation crew without peer! I will and have recommended them to friends and family!”
Posted on Google“I asked them to come to my house to quote a gutter repair. While they could not fix it that day, they came back within a couple of days and fixed my gutter free of charge. You can’t ask for better service and nicer people. There is no doubt that the next time I need new gutters, TBTJDG will be who I call.”
Posted on GoogleGutter Style Questions, Answered
K-style has a flat back and a K-shaped front, and it is the profile you see most on houses and commercial buildings since it is sturdy and carries plenty of water. Half-round is a curved gutter chosen mainly for its looks, which makes it a specialty style. Each is available in 5 and 6 inch.
Half-round, often in copper, suits historic Charleston homes and Lowcountry houses under metal roofs, where the gutter is meant to be noticed. A brick ranch in West Ashley or a newer two-story in Summerville usually looks cleanest with K-style matched to the trim. We can show both against your actual roofline.
Yes. Both K-style and half-round can be made as a radius gutter that curves along a rounded section of the house. That keeps water under control around the curve rather than leaving a gap. Ask about it during your free estimate.
We use the Quick Screw hidden hanger. Its screw comes already started, a sleeve around it adds strength, and a gentle arch on the underside stiffens it. It goes in at an angle through the gutter’s back and into the fascia. Old spike and ferrule hangers loosen as wood swells and shrinks in our humidity, and bargain hidden hangers cut a gutter’s life short.
Corners are where leaks often start, so we seal every corner at three points: down the manufacturer’s seam in the center, on the inside where the gutters lap into it, and across the top where they join. Angled walls and bay windows get a bay miter so the gutters meet neatly.
For drainage, no. Both handle water and debris about the same, so it comes down to looks. Round corrugated downspouts are strong and pair well with copper half-round on a historic home in Charleston or Mount Pleasant, while smooth round downspouts come only in copper and dent more easily.
Service area
Charleston and Lowcountry communities we serve
Every community on this list is inside our service area and gets the same local crew, seamless gutters formed on site and free written estimates. Call (843) 867-2267 or request a free quote and a Solutionist will come out.
- Mount Pleasant
- Charleston
- West Ashley
- James Island
- Daniel Island
- North Charleston
- Hanahan
- Goose Creek
- Ladson
- Summerville
- Johns Island
- Folly Beach
- Isle of Palms
- Sullivan’s Island
- Awendaw
- McClellanville
Free estimates
Want gutters that fit your home’s style?
Schedule a free estimate to see how K-style and half-round look on your roofline, with a written price for each one.
The Brothers That Just Do Gutters · Charleston · (843) 867-2267 · Serving 25 Charleston Area Communities
Gutters for Porches and Piazzas in Charleston and the Lowcountry
Gutters on Metal Roofs in Charleston and the Lowcountry
When to Clean Gutters in Charleston: Live Oaks, Pine Straw and Storm SeasonVeteran Owned & Operated in Mount Pleasant, SC · Serving 25 Charleston Area Communities
Wind and leaves season is hitting hard.Protect your home before it’s too late.
Fall wind is stripping the pines, oaks and sweetgums across Mount Pleasant, Charleston and the Lowcountry, and every gust drops more into your gutters. Once they clog, the next hard rain spills over and sends water toward your roof, walls and foundation. Get on a regular maintenance schedule and add gutter guards now, so your home is protected before the damage starts.